Search analytical instrument parts

The Shimadzu ATY224R is a 220g capacity x 0.1mg readability analytical balance featuring UniBloc mass sensor technology, external calibration, adjustable environmental response modes, dual USB/RS-232 interfaces, and a 3-door anti-static draft shield for precise lab weighing.

Automated 8-vessel tablet dissolution tester for research, formulation, and quality control. Features PID temperature control, automated drive head lift, and compliance with USP, ASTM, and EP dissolution testing protocols.

Shimadzu perfluoro elastomer (FFKM / Parfulo) P5 size O-ring (PN 670-11518 / 670-11518-00) designed for sealing the drain valve shaft and rinse seal assemblies in Shimadzu HPLC modules.

Flame ionization detector cleaning kit for Agilent GCs. Includes specialized wire bristle brushes, reamers/files, and a pin vice handle for cleaning FID detector assemblies and jet tips.

The Leybold SOGEVAC SV 40 BI is a single-stage, oil-sealed rotary vane vacuum pump with gas ballast. Designed for high reliability, low noise, and continuous operation, it delivers a nominal pumping speed of 42 m³/h (50 Hz) / 50 m³/h (60 Hz) for demanding industrial and laboratory applications.

15 cm manual sampling collector cannula with 4 mm tube diameter, designed for manual sample withdrawal from dissolution test vessels in pharmaceutical testing laboratories.

30cm manual sampling collector with a 4mm tube diameter, designed for manual fluid sample collection and liquid transfer in laboratory applications.

The BK-FPO-V2 is a fully automated freezing point osmometer designed for clinical, pharmaceutical, and food research laboratories to determine total osmolarity by measuring solution freezing point depression according to Raoult's principle.

Benchtop digital tablet hardness tester in stainless steel designed for precise measurement of tablet mechanical strength and dimensions (hardness in kgf, KP, N, grf, mN and diameter/length in mm) for quality control in pharmaceutical and laboratory applications.

The ebm-papst 3314GS is a 24V DC axial cooling fan (92x92x32 mm, 2.4W, 3-wire) designed for instrument thermal management. Integrated by Agilent under PN 3160-1017 for HPLC binary pumps, autosamplers, and detectors.

The Thermo Scientific (formerly Ahura Scientific) TruScan is a portable handheld Raman spectrometer designed for rapid, non-destructive chemical identification and raw material verification in pharmaceutical and industrial settings.

Stainless steel sieve for HPLC pump outlet valves (10/pk), designed to trap particulate matter and protect downstream chromatography components in Agilent LC systems.

The Pfeiffer Vacuum IKR 251 is a compact cold cathode gauge (inverted magnetron principle) designed for high vacuum pressure measurement from 2x10^-9 to 1x10^-2 hPa/mbar. Features a DN 25 ISO-KF flange, FPM sealing, and logarithmic output signal.

Leica Biosystems BOND Ready-to-Use Primary Antibody Desmin (clone DE-R-11, 7 mL) is an IVD monoclonal antibody for qualitative identification of human desmin in FFPE tissue sections using automated Leica BOND staining systems.

Kit containing five 0.2 µm stainless steel replacement filters and five replacement inlet nuts for 2.1 mm ID columns, used with the ACQUITY Column In-Line Filter Kit.

Dual-wavelength (185 nm and 254 nm) replacement photooxidation UV lamp for Merck Millipore Milli-Q water purification systems. Degrades organic contaminants to reduce Total Organic Carbon (TOC) levels in ultrapure water.

Replacement 0.5 ml PTFE plunger tip (syringe seal) for Hitachi HPLC autosampler syringes, designed to provide leak-tight sealing and precise liquid delivery in autosampler dosing syringes.

Flexible yellow PEEK tubing for HPLC/UHPLC/IC applications, featuring an outer diameter of 1.6 mm (1/16 in), inner diameter of 0.18 mm (0.007 in), and length of 1.5 m. Delivers bio-inert, high-pressure fluid transfer.

Hitachi 638-1423 is a flow path filter (drain/purge valve filter) for Hitachi HPLC pumps. It traps particulates in mobile phases to protect downstream chromatographic components, maintaining consistent pressure and solvent flow.

Hitachi plunger seal (PN 655-1080) for HPLC pump heads, providing tight liquid sealing around the reciprocating plunger to maintain operating pressure and prevent mobile phase leakage.

Inlet Check Valve Assembly for Hitachi HPLC pumps. Prevents solvent backflow on the suction side during piston strokes to maintain accurate flow rates and stable system pressure.

Replacement OEM drain valve packing seal for Hitachi HPLC solvent delivery pump drain and purge valves, engineered to prevent solvent leaks and maintain system pressure.

Hitachi Packing (B) (PN 810-1344) is a thick black valve flat gasket (OD 6.0 mm, thickness 2.0 mm) for check valve and pump head assemblies in Hitachi HPLC pumps, including LaChrom L-7100, LaChrom Elite L-2130, Primaide PM1110, and Chromaster 5110.

Hitachi Packing (2) (PN 810-1345) is an authentic thin black valve seal packing for check valve assemblies in Hitachi HPLC pumps. It ensures leak-free liquid sealing and consistent solvent delivery pressure in analytical chromatography systems.

The Hitachi 810-3095 is an OEM diluter valve seal designed for injection and diluter valve assemblies in Hitachi HPLC autosamplers. It ensures fluidic integrity and leak-free performance during automated sample processing.

12 µl flow cell designed for use with Hitachi LaChrom Elite L-2480 fluorescence detectors in High-Performance Liquid Chromatography (HPLC) systems.

Hitachi optical light guide (PN 890-1192) designed for LaChrom Elite HPLC series modules including pumps, autosamplers, and detectors.

150W long-life Xenon lamp (Hamamatsu L-2175 / L-2175-04) designed for Hitachi HPLC fluorescence detectors and spectrofluorometers, providing high radiant output and arc stability across 185–2000 nm UV-Vis wavelengths.

Inlet tube assembly for Hitachi HPLC diode array detectors (DAD). Connects HPLC flow line to detector flow cell for precise sample transport in chromatography applications.

Hitachi 20W tungsten halogen replacement lamp (PN 890-2527) designed for HPLC optical detectors, including UV/Vis and Diode Array Detectors (DAD). Operates at 12V with a G4 2-pin base, providing reliable visible-light illumination for chromatographic analysis.

Injection port seal (PEEK material) designed for Hitachi LaChrom Elite L-2200 HPLC autosamplers, ensuring leak-free sealing at the needle-to-port interface.

The Hitachi 890-3243 is a replacement PEEK injection valve rotor seal for Hitachi HPLC autosamplers. It provides high-pressure, leak-tight sealing during valve rotation and directly replaces OEM part number 890-3238.

Plunger tip replacement seal for 0.1 mL (100 µL) autosampler dosing syringe (PN 890-3228) used in Hitachi LaChrom Elite HPLC systems.

Toroidal Mirror Assembly A for Hitachi HPLC Diode Array Detectors (DAD), used in the optical bench to focus light into the flow cell and diode array spectrometer.

Photo Interrupter SY optical sensor assembly for Hitachi LaChrom Elite L-2200 Autosampler. Used for precise position sensing during automated HPLC sample injection cycles.

Hitachi Photo Interrupter SV (PN 890-6727) is an optical position sensor designed for the LaChromElite L-2200 HPLC Autosampler. It detects mechanical axis/valve positions to ensure accurate sample loading and system timing.

Comprehensive maintenance parts kit for Hitachi LaChrom Elite HPLC systems. Contains routine replacement components, wear parts, and seals required for periodic preventative maintenance to ensure leak-free performance and reliable chromatography operation.

An internal communication interface board manufactured by Hitachi for HPLC analytical systems. It enables USB communication and data transfer between Hitachi liquid chromatography modules (pumps, autosamplers, detectors) and a control PC running chromatography management software.

High-pressure plunger seal designed for Hitachi Chromaster 5160 and LaChromUltra L-2160U HPLC/UHPLC pumps operating up to 600 bar. Prevents mobile phase solvent leakage along the piston shaft during high-pressure liquid chromatography runs.

Hitachi Packing (B) (PN 891-1364) is an OEM replacement valve flat packing seal designed for Hitachi Chromaster 5160 and LaChromUltra L-2160U liquid chromatography pumps to maintain leak-free pressure sealing in solvent delivery flow paths.

0.1 mL Polyethylene (PE) syringe designed for Hitachi HPLC autosamplers. Serves as a direct replacement for part number 891-3958, providing precise sample aspiration and volumetric accuracy in liquid chromatography systems.

Polyethylene (PE) replacement plunger seal tip for 0.1 mL (100 µL) autosampler syringes used in Hitachi HPLC systems.

200 µl stainless steel sample loop designed for Hitachi Chromaster 5210 and 5260 HPLC autosamplers, providing precise sample holding and low carryover sample introduction.

Maintenance parts kit designed for Hitachi Chromaster 5110 HPLC pumps. Includes essential replacement seals, packings, and filters required for routine preventive maintenance to ensure optimal pump sealing, flow accuracy, and pressure stability.

Comprehensive OEM preventive maintenance parts kit for Hitachi Chromaster 5160 HPLC pumps. Includes primary pump seals, wash seals, drain valve seals, packings, and flow path filters required for routine pump servicing and optimal fluidic performance.

Hitachi Maintenance Parts Kit (PN 892-0895), Type A, for Chromaster HPLC 5210 autosamplers. Kit includes replacement seals and syringe tips required for routine preventative maintenance.

Long-life deuterium (D2) lamp (2000-hour rated) with flat window design for Hitachi HPLC detectors and spectrophotometers. Provides reliable UV illumination for accurate liquid chromatography analyte detection.

Hitachi 175 µL PTFE syringe tip (plunger seal) for Chromaster 5210 and 5260 HPLC autosampler syringes. OEM PN 893-0808 (superseded by 893-0818).

Hitachi Injection Port Seal (PN 893-0810) designed for Chromaster 5210 and 5260 HPLC autosamplers. Ensures leak-free sealing around standard sample injection needles in liquid chromatography systems.

Hitachi Syringe Valve Seal (PN 893-0814) designed for Chromaster HPLC autosamplers. Ensures reliable, leak-free liquid sealing within the syringe valve assembly to maintain flow accuracy and prevent sample contamination.

Replacement PTFE syringe plunger seal (tip) for 175 µl diluter syringes used in Hitachi Chromaster HPLC autosamplers. Ensures leak-tight liquid dispensing and sample aspiration.

Replacement Vespel injection valve seal designed for Hitachi Chromaster 5260 HPLC autosamplers (600 bar). Ensures leak-free operation and optimal switching performance in high-pressure sample injection valves.

Maintenance parts kit designed for Hitachi LaChrom Elite L-2200 and Primaide PM1210 high-speed HPLC autosamplers. Includes key consumable seals and tips to perform routine preventive maintenance and ensure reliable liquid chromatography performance.

Pre-aligned see-through deuterium (D2) lamp designed for Hitachi Chromaster 5430 and Chromaster Ultra RS 6430 Diode Array Detectors (DAD). Delivers high-intensity UV output and stable baseline performance for HPLC applications.

Transmissive optical sensor assembly (photointerrupter SY) for Hitachi LaChromElite L-2200 HPLC Autosamplers, used for mechanical position sensing and tray/arm alignment.

VWR Hitachi Packing (2) / Packing (A) is a replacement valve seal gasket for Hitachi HPLC pump check valve assemblies. Compatible with Chromaster 5110/5160, LaChrom Elite L-2130, LaChrom L-7100/L-7110, and Primaide PM1110 pumps. Pack of 1.

The Shimadzu 228-21217-91 is an OEM 6-port high-pressure injection valve rotor seal designed for SIL-10 series HPLC autosamplers. Made of durable Vespel material, it ensures precise sample delivery and reliable fluid sealing in liquid chromatography applications.

Standard deuterium (D2) light source engineered for Shimadzu HPLC UV-Vis detectors, delivering high UV stability and low noise with an operating lifetime of up to 2,000 hours.

Shimadzu replacement 3-way valve rotor (PN 228-34417-04) designed for SIL-10 series HPLC autosamplers. Works with the 3-way valve stator to direct fluid flow during sample injection and washing cycles.

Polyethylene (PE) rinse seal for Shimadzu HPLC solvent delivery pumps, designed to wipe plunger shafts and prevent mobile phase salt crystallization on pump seals.