Search analytical instrument parts

APCI Probe, 500 mm × 125 µm

APCI Probe, 750 mm × 12 5 µm

Calibration Pin, Assy (for MKII Ion Block)

ESI Probe Assembly (UPC 2) 750 mm × 5 0 µm

The Waters Probe Adjuster Assembly (PN 700011425) is an ion source positioning mechanism for Waters LC-MS systems. It enables precise alignment of ESI, APCI, and EScI spray probes relative to the ion sampling orifice to optimize signal intensity, desolvation, and analytical sensitivity.

Reference Probe, Probe Tips, Air Filters.

100 µL Syringe

Assy, Mixer, 4.6 mm × 100 mm, Path 1

Assy, Mixer, 4.6 mm × 50 mm, Path 2

Assy Textured Needle 15 µL with Guide and Seat

Assy, Mixer, 4.6 mm × 100 mm, 200 µm

Assy Textured Needle 15 µL with Guide and Seat

Assy, Barbed Seal Wash Housing

Pump Head, Ti

Wash Seal, Dual Spring MP35N .125 I.D, 2/pk

Assy, Cartridge, Dual Mixer Vent Valve

Assy, Tube, Head to Transducer

Assy, Tube, Xducer - ACC

Assy, Tube, VV P4 to 100 mm Mixer

Assy, Tube, VV P2 to 50 mm Mixer

Assy, Tube, Mixer to VV P1 Path 1

Tube Assy, Solvent Inlet

Assy, Solvent Filter, Thru Tube, Ti

Assy, Solvent Filter, Thru Tube, Ti 7/pk

Assy, Tube, GPV to PCV

Assy, Cartridge, Inlet Filter, Ti

Tubing, .040 PEEK, GPV, 4/pk

Assy, Tube, VV P7 to Waste

Assy, Tube, Xducer - VV

Kit, Assy, Seat Port, MP35N, .007 I.D.

Replacement stented Performance Plus vacuum degasser chamber for HPLC solvent degassing. Features a low internal volume (500 µL) and PTFE AF membrane, providing efficient dissolved gas removal, easier system priming, and fast solvent changeovers across compatible Waters LC modules.

100 µl Syringe 3777C

Needle 3777C (3/pk)

Holding Loop 3777C

ACQ. I-Class PDA Tubing Single Detector

ACQ. I-Class TUV Tubing Single Detector

ESI Probe Assembly 500 mm

EI Filament Assembly

EI Ion Chamber

Repeller, XL Source

CI Ion Chamber

Xevo TQ-GC CI Service Kit

Source Gas Seal Restrictor

O-Ring, Viton, 5.5 × 1.6 C/S

Aperture Disc 0.2 mm, 5/pk

Sample Cone

Ion Block Assembly

Gasket, Pumping Block (Rear) MKII FEPM

Genuine Waters Inlet Check Valve (PN 700012198) designed for HPLC liquid chromatography pumps to maintain unidirectional solvent flow, prevent backflow, and ensure accurate pressure delivery. Recommended for annual replacement.

Sample Cone (Reverse)

Tube. MP35N, .062 × .005 × 10 L

LockSpray Reference Probe

Purifier Module, Helium 1/8" Fittings

Vial, Amber, 20-ml, with Screw Cap, Headspace, 100/pk

Drive Belt, PAL3 Agitator, 6 × 20 ml, 3/pk

Smart Syringe, 2500 µL

Smart Syringe, 10 µL

Vial, Clear, 20-ml, with Screw Cap, Headspace, 100/pk

Cap, Magnetic, for 20-ml Vial, Headspace, 100/pk

Pack of 5 MaxPeak HPS 0.2 µm, 2.1 mm replacement frits and nuts designed for use with the Waters MaxPeak HPS In-Line Filter Kit.