Search analytical instrument parts

Union, 1/4–28, THRU

Screw, Metric Skt Cap M5 × 40, 2/pk

250 µL Sample Syringe

50 µL Sample Syringe

Ferrule, Set, .062, Two-piece

Plug, One-piece, 10–32, Coned

Sample Needle Fitting Kit

Thumb Screw, Stainless Steel, M5 × 11 mm Large

Union, Internal Reducer

In-line Waste Valve

Screw, Panel, M4 × 16, Blue

Drip Tray

Clip Retainer

Drip Tray, CH-A

Bulkhead Actuator Insulation , SFC-BSM

Insulator, Actuator, Pre-chiller, SFC-BSM

Packing Ring, Nebulizer

Column Heater Thermal Gasket

10 ft. (3 m), SS

System Outlet Tubing

Tube Assembly, Solvent Inlet SDS

Genuine Waters UPLC inject outlet tubing assembly (0.005 in. ID x 11 in. length) designed for ACQUITY UPLC Sample Managers to connect the injector valve outlet to downstream LC components with low dead volume.

Needle Guide Tube

Assy, Tube, Degasser Port B2 to SSV B

Assy, Tube, Degasser Port B1 to SSV B

Assy, Tube, Degasser Port A1 to SSV A

Assy, Tube, Degasser Port A2 to SSV A

Assy, Tube, Head to Xducer

Tube Assembly, Transducer to Check Valve

Assy, Tube, Accu. “B” Xducer—Vent Valve

Assy, Tube, Accu. “A” Xducer—Vent Valve

Assy, Tube, Vent Valve P5 to Tee/Filter

Assy, Tube, Vent Valve P2 to Tee/Filter

Assy, Tube, Vent Valve P1 to Waste

Assy, Tube, Vent Valve P4 to Waste

Tube Assembly, Inject Out

MS Inlet Tubing Assembly

A 2 µL low-dispersion sample loop designed for Waters ACQUITY UPLC systems, ensuring accurate and reproducible sample introduction onto small-volume analytical columns while maintaining separation efficiency.

Sample Loop, 5 µL

Sample Loop, 20 µL, Std.

Sample Loop, 50 µL

A 10 µL stainless steel sample loop assembly manufactured by Waters Corporation for UPLC autosamplers and sample managers.

Tube, Vent Valve Port 5 to Filter

Solvent Inlet Tube (Aux. Pump Only)

Tube Set, A2 and B2 Inlet Lines

Assy, Tube, SSV to i2V

Assembly, Waste Tube, HTM, PEEK

Tubing Assembly, Solvent Select Valve to In-line Filter

Tube Assembly, System Outlet SDS

Tube, Vent Valve Port 2 to Filter

Tube, Vent Valve Port 5 to Filter

SEC Protein Standards are matched to the pore size of the column. * To connect two UPLC SEC Columns together in series, we recommend using a Waters Sample Loop (p/n

Tube, ACC. A Transducer to Vent Valve P3

Tube, ACC. B Transducer to Vent Valve P6

Convoluted Tubing

ELSD Outlet Tubing (0.004" I.D. × 6" length)

PEEK Tubing, 14 in. × .004 in. I.D.

Tube, Filter to Flow Sensor Inlet A

Tube, Filter to Flow Sensor Inlet B

Capillary Tubing with Frit, 25 µm × 10 in.